Bedienungsanleitung

Hi! Thanks for passing by.

Here are the links to the digital versions of the user manual in German, French, and English:

The video also shows you the key points for the correct use of the spark bottle. Be sure to watch it to get the best user experience.

Here also a step-by-step guide of the key points:

1. Firmly screw the CO2 cylinder into the refilling station.

You need to apply considerable force to open the cylinder valve, allowing the carboniser to be filled properly.

2. Press the bottle down firmly on the movable platform of the refill station for 10-15 seconds.

You will hear the CO2 flowing; after about 10-15 seconds, this sound will weaken and then disappear. The carboniser is now fully filled and weighs approximately 280g (without the bottle).

3. Fill the bottle with water up to the recommended fill level.

Then, screw the lid on tightly until it is fully closed.

4. Hold the bottle upright and press the carboniser button firmly for 5-20 seconds.

You will hear the CO2 flowing into the bottle. Keep the button pressed until you hear the overpressure release—this takes 5-20 seconds, depending on how strongly you press the carboniser button.

5. Shake the bottle vigorously.

Afterwards, either repeat step 4 for stronger sparkling water, or carefully open the bottle.

Here are the links to more helpful videos and tips:

Removing the sealing ring from the lid for cleaning: Videolink
Removing the movable platform for cleaning: Videolink
Assistance with carboniser damage - Can I continue to use it? Link

Do you have any questions? Maybe we can answer them below. If not, be sure to contact us (see below).

1. Make sure the CO2 cylinder is firmly screwed into the refilling station.
2. Press the spark bottle down firmly until you hear the CO2 flowing (a squeaking sound). When you hear the flowing sound, continue to press the bottle down firmly until the sound gradually weakens and then disappears. This takes about 10-15 seconds.
3. Then, lift the bottle vertically upwards from the refilling station.
1. Fill the bottle to the recommended fill level (where the curve of the bottle shoulder begins) and screw the lid on tightly until it is fully closed.
2. Hold the bottle upright and press the carboniser button firmly so you can hear the CO2 flowing into the bottle. Keep the button pressed until you hear the overpressure release, which sounds like a slight "blowing off." It takes 5-20 seconds for the overpressure release to activate, depending on how strongly you press the carboniser button.
3. Now shake the bottle vigorously to make the water sparklier.
4. Carefully open the lid, or if you want stronger sparkling water, you can press the button again.

Our contact details:

Email: hello@bottleplus.com

Phone Switzerland: +41 62 559 07 50

Phone EU: +49 158 882 790 07

We welcome any feedback, inputs, and experiences you would like to share with us.

Cart0 items

1. Firmly screw the CO2 cylinder into the refilling station.

2. Press the bottle down firmly on the movable platform of the refill station for 10-15 seconds.

3. Fill the bottle with water up to the recommended fill level.

4. Hold the bottle upright and press the carboniser button firmly for 5-20 seconds.

5. Shake the bottle vigorously.